Netgear WC9500 Manual de usuario descargar pdf (Pagina 94)

Configure the System and Network Settings and Register the Licenses

ProSAFE Wireless Controller WC9500

5. Configure the settings as described in the following table.

Setting Description

Name Enter a unique value as the wireless controller name. NETGEAR recommends

changing the name as soon as possible after setting up.

The name must contain only alphabetical characters, numbers, and hyphens, and must

be 31 characters or less.

Country/Region From the menu, select the region of operation for the wireless controller and the access

points that the wireless controller manages.

This setting is crucial for optimal performance of the wireless controller. The wireless

controller uses the country code to determine the best wireless settings for the access

points. In the United States, the country is preset and cannot be changed on the access

points. If the country or region is not set up correctly

, the wireless controller might not

be able to access the access points.

Note: To enable the wireless controller to transmit at a higher power level than the level

that might be specified for your country or region, select Rest of World from the

Country/Region menu.

Controller

Location Code

(Optional) Enter a code to identify the physical location of the wireless controller.

If you use more than one wireless controller, a code is especially useful.

6. Click the Apply button.

The changes are saved.

Manage the Time Settings

This screen lets you configure the time-related settings of your wireless controller and

managed access points.

 To configure time settings:

1. Open a web browser. In the browser’

s address field, type the wireless controller’s IP

address.

By default, the IP address is 192.168.0.250.

The wireless controller’s login screen displays.

2. Enter your user name and password.

If you did not yet personalize your user name and password, enter admin for the user

name and password for the password, both in lowercase letters.

3. Click the Login button.

The wireless controller’s web management interface opens and displays the Summary

screen.

4. Select Configuration > System > T

ime.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 356 357

Sin comentarios

Netgear WC9500 Manual de usuario Pagina 94