Netgear WC9500 Manual de usuario descargar pdf (Pagina 33)

System Planning and Deployment Scenarios

ProSAFE Wireless Controller WC9500

Stacked Controller Configuration

A stacked controller configuration can consist of up to three wireless controllers and up to

600 access points.

Note: If the stack members are on different floors or in different buildings, you

could configure a separate access point profile group for each building or

floor.

 To set up a stacked controller configuration:

Step Configuration Web Management Interface Path

1. On each individual wireless controller that you intend to make a

stack member, configure the system and network settings of the

wireless controller:

1. Configure the country code of operation.

Configuration > System > General

2. Configure the time settings.

Configuration > System > T

ime

3. Configure the IP address of the wireless controller.

Configuration > System > IP/VLAN

4. Verify that VLAN 1 is set as the management VLAN and is

marked as untagged.

By default, VLAN 1 an untagged management VLAN.

5. If no network DHCP server is accessible to the access points,

configure the wireless controller’

s DHCP server

Configuration > System > DHCP

Server

2. Configure the master wireless controller and deploy it in the

network.

Configure up to eight access point profile groups, and for each

access point profile in a group, do at least the following:

1. Configure an SSID for wireless access.

Configuration > Profile > Advanced

2. Configure the network authentication and data encryption.

Assign the VLAN.

4. If necessary for the selected network authentication option,

configure the authentication server.

Configuration > Security >

Advanced > Authentication Server

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 356 357

Sin comentarios

Netgear WC9500 Manual de usuario Pagina 33