Netgear WC9500 Manual de usuario descargar pdf (Pagina 49)

RF Planning and Deployment

ProSAFE Wireless Controller WC9500

as closely as possible. Doing so enables you to generate a realistic heat map for the

deployed floor plan.

For more information, see View the Heat Map for a Deployed Floor Plan on page 81.

Manage a Building and Floors for an RF Plan

This section describes how you can define a building and floors and make modifications after

you define them.

Defining a floor includes the following main tasks:

• Uploading a custom floor map and setting dimensions (see Add a Building and Floors on

page 49)

• If you do not set dimensions, scaling the floor (see Scale a Floor on page 53)

• Adding WiFi coverage zones and WiFi noncoverage zones (see Add a WiFi Coverage or

WiFi Noncoverage Zone to a Floor on page 54)

• Adding WiFi building obstacles (see Add a WiFi Building Obstacle to a Floor on page 56)

• Adding WiFi obstruction areas (see Add a WiFi Obstruction Area on page 58)

Add a Building and Floors

The wireless controller includes a default building and default floor with a default floor map.

You cannot remove the default building or default floor but you can replace the default floor

map with a custom floor map.

 To add and define a building and floors:

1. Open a web browser. In the browser

’s address field, type the wireless controller’s IP

address.

By default, the IP address is 192.168.0.250.

The wireless controller’s login screen displays.

2. Enter your user name and password.

If you did not yet personalize your user name and password, enter admin for the user

name and password for the password, both in lowercase letters.

3. Click the Login button.

The wireless controller’s web management interface opens and displays the Summary

screen.

4. Select Plans > Planning.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 356 357

Sin comentarios

Netgear WC9500 Manual de usuario Pagina 49