Netgear WC9500 Manual de usuario descargar pdf (Pagina 42)

System Planning and Deployment Scenarios

ProSAFE Wireless Controller WC9500

- SSID 3 in VLAN 30 for guests

Backend L3 switch

or router

WC9500

Core switch

PoE switch

WNDAP360

Internet

Staff VLAN 10 Ethernet traffic

Middle school VLAN 20 Ethernet traffic

High school VLAN 40 Ethernet traffic

Guest VLAN 30 Ethernet traffic

Building 1

Building 2

SSID 1 Staff VLAN 10

SSID 2 Middle school VLAN 20

SSID 3 Guest VLAN 30

SSID 1 Staff VLAN 10

SSID 2 High school VLAN 40

SSID 3 Guest VLAN 30

Redundant WC9500

Figure 11. Example: Advanced network with redundancy

The access points and wireless controllers are connected in the same subnet and the same

VLAN and use the same IP address range that is assigned for that subnet. The core switch is

located between the wireless controllers and the PoE switches, to which the access points

are connected. The core switch provides Internet access.

This network configuration requires the following conditions:

• VLAN 1 is configured on the wireless controllers, core switch, and PoE switches. This

VLAN is untagged.

• VLANs 10, 20, and 30 are configured on the wireless controllers, core switch, and the

PoE switch in Building 1. These VLANs are tagged.

• VLANs 1, 10, 20, 30, and 40 are configured on the wireless controllers, core switch, and

PoE switches. Except for VLAN 1, these VLANs are tagged.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 356 357

Sin comentarios

Netgear WC9500 Manual de usuario Pagina 42