Netgear WC9500 Manual de usuario descargar pdf (Pagina 64)

RF Planning and Deployment

ProSAFE Wireless Controller WC9500

Remove an Entire Building with All Its Floors

You can remove an entire building with all its floors. However, you cannot remove the default

building.

 To remove an entire building:

1. Open a web browser. In the browser’

s address field, type the wireless controller’s IP

address.

By default, the IP address is 192.168.0.250.

The wireless controller’s login screen displays.

2. Enter your user name and password.

If you did not yet personalize your user name and password, enter admin for the user

name and password for the password, both in lowercase letters.

3. Click the Login button.

The wireless controller’s web management interface opens and displays the Summary

screen.

4. Select Plans > Layout.

The screen displays the Planning icons.

5. In the building tree on the left, click the building name.

6. Click the T

rashcan

icon.

7. Confirm the removal.

The building with all its floors is removed.

Use the WiFi Auto Planning Advisor to Generate an RF Plan

for a Floor

After you define a building and floors (see Manage a Building and Floors for an RF Plan on

page 49), you can run the WiFi auto planning advisor for a floor. This tool calculates the

number of access points and, optionally, antennas that you might need to provide WiFi

coverage for your environment and suggests the best locations on the floor for these access

points and antennas.

The WiFi auto planning advisor bases its calculations on the building and floor definitions and

lets you enter the following parameters to determine the WiFi coverage for your environment:

• NETGEAR access point (see Supported NETGEAR Access Points on page 18)

• NETGEAR antenna (see Supported NETGEAR Antennas on page 21)

• For each WiFi band of a selected access point, the following parameters:

- 802.1

1 protocol (depending on the access point, 802.11b/g/n, 802.11a/n, or both)

- Transmit power (from minimum power to full power)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 356 357

Sin comentarios

Netgear WC9500 Manual de usuario Pagina 64