Netgear WC9500 Manual de usuario descargar pdf (Pagina 71)

RF Planning and Deployment

ProSAFE Wireless Controller WC9500

9. Click the Confirm button.

The changes are saved and the pop-up screen closes.

The new access point is placed at the top of the floor map.

10. Move the access point to the desired location on the floor map by dragging the access point

to a location on the floor map.

11. T

o change the properties for an access point, do the following:

a. Double-click the access point.

A pop-up menu displays.

b. From the pop-menu, select Edit Properties.

The Edit AP pop-up screen displays. This screen is identical to the Add AP pop-up

screen.

c. Change the properties.

For information about the properties, see the previous table.

d. Click the Confirm button.

The changes are saved and the pop-up screen closes.

12. T

o remove an existing access point from the floor map, do the following:

a. Click the access point to select it.

b. Click the

Delete link.

2.4G Specify the settings for the 2.4 GHz band:

• Enable. By default, the On radio button is selected and the 2.4 GHz band is

enabled. T

o disable the 2.4 GHz band, select the Off radio button.

• Channel. Leave the default selection Auto to enable the access point to select a

channel automatically

, or select a specific channel from the menu.

• Protocol. When you select an access point, this field is populated automatically

• Transmission Power (dBm). From the menu, select FULL, HALF(1/2)

QUARTER(1/4), EIGHT(1/8), or MINIMUM(1/16). The default setting is HALF(1/2).

• Antenna Gain (dBi). When you select an access point, this field is populated

automatically

5G If the selected access point supports the 5 GHz band, specify the settings for the 5 GHz

band:

• Enable

. By default, the On radio button is selected and the 5 GHz band is enabled.

o disable the 5 GHz band, select the Off

radio button.

• Channel. Leave the default selection Auto to enable the access point to select a

channel automatically

, or select a specific channel from the menu.

• Protocol. When you select an access point, this field is populated automatically

• Transmission Power (dBm). From the menu, select FULL, HALF(1/2)

QUARTER(1/4), EIGHT(1/8), or MINIMUM(1/16). The default setting is HALF(1/2).

• Antenna Gain (dBi). When you select an access point, this field is populated

automatically.

Setting Description

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 356 357

Comentarios a estos manuales

Sin comentarios

Netgear WC9500 Manual de usuario Pagina 71

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Netgear WC9500