Netgear WNDAP380Rv2 Manual de usuario descargar pdf (Pagina 54)

Wireless Configuration and Security

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

Configure WPA-PSK, WPA2-PSK, and WPA-PSK & WPA2-PSK

WPA-PSK, WPA-PSK, and WPA-PSK & WPA2-PSK authentication use a pre-shared key

(PSK, also called a passphrase or a network key) and do not require authentication from a

RADIUS server.

The selections that are available from the Data Encryption drop-down menu depend on the

type of WPA-PSK authentication that you select from the Network Authentication drop-down

menu and are shown in the table that follows the figures.

• WPA-PSK

Figure 15. WPA-PSK

• WPA2-PSK

Figure 16. WPA2-PSK

• WPA-PSK & WPA2-PSK

Figure 17. WPA-PSK & WPA2-PSK

AES Advanced Encryption Standard (AES) is the standard encryption method used with WPA2.

Note: Although some wireless clients might support AES with WPA, the WNDAP380R wireless

access point does not support WPA with AES.

TKIP + AES The TKIP + AES encryption method is supported both for WPA and WPA2. Broadcast packets

use

TKIP. For unicast (point-to-point) transmissions, WP

A clients use TKIP, and WPA2 clients

use AES. For the WPA & WPA2 mixed mode, TKIP + AES is the only supported data encryption

method.

Table 3. Settings for WPA with RADIUS, WPA2 with RADIUS, and WPA & WPA2 with RADIUS

Setting Descriptions

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 151 152

Sin comentarios

Netgear WNDAP380Rv2 Manual de usuario Pagina 54