Netgear WNDAP380Rv2 Manual de usuario descargar pdf (Pagina 46)

Wireless Configuration and Security

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

Configure and Enable Security Profiles

To configure and enable a security profile, you need to enable the associated radio:

• For 802.11b//jointfilesconvert/35013/bg/ng modes, the 2.4 GHz radio needs to be enabled (see

Configure

802.11b//jointfilesconvert/35013/bg/ng Wireless Settings on page 25).

• For 802.11a/na modes, the 5

GHz radio needs to be enabled (see Configure 802.11a/na

Wireless Settings on page 28).

Both radios can function concurrently.

The wireless access point is set by default as an open system with no authentication. When

you configure network authentication, bear in mind the following:

• If you are using access point mode (which is the default mode if you did not enable

wireless bridging), all options are available. In other modes such as bridge mode, some

options might be unavailable.

• Not all wireless adapters support WPA or WP

A2. Consult the product documentation for

your wireless adapter and WPA or WPA2 client software for instructions about how to

configure WPA or WPA2 settings.

WARNING:

If you use a wireless computer to configure wireless security

settings, you are disconnected when you click Apply. Reconfigure

your wireless computer to match the new settings, or access the

wireless access point from a wired computer to make further

changes.

 To configure and enable a security profile:

1. Select Configuration > Security > Profile Settings.

The Profile Settings screen for the 802.11b//jointfilesconvert/35013/bg/ng modes displays eight wireless security

profiles. (If the 2.4 GHz radio is disabled, the Enable column is masked out.)

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 151 152

Sin comentarios

Netgear WNDAP380Rv2 Manual de usuario Pagina 46