Netgear WNDAP380Rv2 Manual de usuario descargar pdf (Pagina 111)

Monitoring

111

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

Monitor Wireless Clients

The Wireless Stations screen contains the Available Wireless Stations table. This table

shows all IP devices that are associated with the wireless access point in the wireless

network that is defined by the wireless network name (SSID). The table headings indicate the

wireless modes (802.11b, 802.11/jointfilesconvert/35013/bg, or 802.11ng for the 2.4-GHz band, and 802.11a or

802.11na for the 5-GHz band).

Note: A wireless network can include multiple wireless access points, all

using the same network name (SSID). This uniformity extends the

reach of the wireless network and allows users to roam from one

wireless access point to another, providing seamless network

connectivity. Under these circumstances, be aware that the

Available Wireless Stations table includes only the stations

associated with this wireless access point.

 To view the attached wireless clients, and to view details for a wireless client:

1. Select Monitoring > Wireless Stations.

The Wireless Stations screen displays:

2. (Optional) Click Refresh to update the list.

If the wireless access point is rebooted, the wireless client data is lost until the wireless

access point rediscovers the devices. When you click Refresh, the wireless access point

attempt to detect associated devices.

Channel / Frequency The channel that the wireless port is using. For information about how to change the

channel and frequency, see Configure 802.11b//jointfilesconvert/35013/bg/ng Wireless Settings on page 25

and Configure 802.11a/na Wireless Settings on page 28.

Rogue AP Detection

Enabled indicates that rogue AP detection is enabled. Disabled indicates that it is not.

Setting Description

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 151 152

Sin comentarios

Netgear WNDAP380Rv2 Manual de usuario Pagina 111