
74 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Viewing the Flash Management Information Screen
Table 4-3.
Field Description
Flash Management
Firmware Version The version of the firmware currently stored in the Flash memory.
Flash Status The status of the active flash memory. The modes are:
• Bootable. The flash memory is bootable.
• ---. The flash memory is not bootable.
Boot from The
indicates the Flash memory to boot from.
Firmware Upgrade Target The
indicates the Flash memory to overwrite with new firmware.
Viewing Wireless Information
To view the system information screens:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2. Select Monitor > Wireless and then Basic or Client. These two screens are shown below
and their fields are explained in the tables below.
Figure 4-10
Comentarios a estos manuales