Netgear GS724TS-100NAS Manual de usuario descargar pdf (Pagina 37)

Chapter 2: Configuring System Information | 37

GS716Tv2 and GS724Tv3 Software Administration Manual

To configure the time by using the CPU clock cycle as the source:

1. From the Clock Source field, select Local.

2. In the Date field, enter the date in the DD/MM/YYYY format.

3. In the Time field, enter the time in HH:MM:SS format.

Note: If you do not enter a date and time, the switch will calculate the date

and time using the CPU’s clock cycle.

When the Clock Source is set to Local, the Time Zone field is grayed out (disabled):

4. Click Apply to send the updated configuration to the switch. Configuration changes occur

immediately.

To configure the time through SNTP:

1. From the Clock Source field, select SNTP.

When the Clock Source is set to SNTP, the Date and Time fields are grayed out

(disabled). The switch gets the date and time from the network.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 274 275

Sin comentarios

Netgear GS724TS-100NAS Manual de usuario Pagina 37