Netgear GS724TS-100NAS Manual de usuario descargar pdf (Pagina 158)

158 | Chapter 5: Managing Device Security

GS716Tv2 and GS724Tv3 Software Administration Manual

To configure TACACS+ server settings:

1. To add a new TACACS+ server, select Add from the TACACS+ Server field, enter the

IP address of the server to add, and click Apply.

Note: The Add option is available if fewer than five TACACS+ servers are

configured on the system, and the Server Address field is only

available when Add is selected in the TACACS+ Server IP Address

field.

After you add one or more TACACS+ servers, additional fields appear on the TACACS+

Server Configuration page.

2. In the Priority field, specify the order in which the TACACS+ servers are used. A value of 0

is the highest priority.

3. In the Port field, specify the authentication port number through which the TACACS+

session occurs. The default is port 49, and the range is 0–65535.

4. In the Key String field, specify the authentication and encryption key for TACACS+

communications between the GS716T or GS724T and the TACACS+ server. This key must

match the encryption used on the TACACS+ server. The valid range is 0–128 characters.

5. In the Connection Timeout field, specify the amount of time that passes before the

connection between the device and the TACACS+ server times out. The field range is from

1 to 30 seconds.

6. If you make changes to the page, or add a new entry, click Apply to apply the changes to

the system.

7. To delete a configured TACACS+ server, select the IP address of the server from the

TACACS+

Server drop down menu, and then click Delete.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 274 275

Sin comentarios

Netgear GS724TS-100NAS Manual de usuario Pagina 158