Netgear GS724TS-100NAS Manual de usuario descargar pdf (Pagina 113)

Chapter 3: Configuring Switching Information | 113

GS716Tv2 and GS724Tv3 Software Administration Manual

To configure IGMP Snooping interface settings:

1. To configure IGMP Snooping settings for a physical port, click PORTS.

2. To configure IGMP Snooping settings for a Link Aggregation Group (LAG), click LAGS.

3. To configure IGMP Snooping settings for both physical ports and LAGs, click ALL.

4. Select the check box next to the port or LAG to configure. You can select multiple ports and

LAGs to apply the same setting to the selected interfaces. Select the check box in the

heading row to apply the same settings to all interfaces.

5. Configure the IGMP Snooping values for the selected port(s) or LAG(s):

• Admin Mode. Select the interface mode for the selected interface for IGMP Snooping

for the switch from the menu. The default is Disable.

• Host Timeout. Specify the amount of time you want the switch to wait for a report for

a particular group on a particular interface before it deletes that interface from the

group. Enter a value between 2 and 3600 seconds. The default is 260 seconds.

• Max Response Time. Specify the amount of time you want the switch to wait after

sending a query on an interface because it did not receive a report for a particular

group on that interface. Enter a value greater or equal to 1 and less than the Host

Timeout, in seconds. The default is 10 seconds.

• MRouter Timeout. Specify the amount of time you want the switch to wait to receive

a query on an interface before removing it from the list of interfaces with multicast

routers attached. Enter a value between 0 and 3600 seconds. The default is 0

seconds. A value of zero indicates an infinite timeout; no expiration.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 274 275

Sin comentarios

Netgear GS724TS-100NAS Manual de usuario Pagina 113