Netgear GS724TS-100NAS Manual de usuario Pagina 103

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 275
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 102
Chapter 3: Configuring Switching Information | 103
GS716Tv2 and GS724Tv3 Software Administration Manual
Click Refresh to update the information on the screen with the most current data.
MST Configuration
Use the Spanning Tree MST Configuration page to configure Multiple Spanning Tree (MST)
on the switch.
To display the Spanning Tree MST Configuration page, click Switching > STP > Advanced
MST Configuration.
To configure an MST instance:
1. To add an MST instance, configure the MST values and click Add:
MST ID. Specify the ID of the MST to create. Valid values for this are between 1 and
4094.
Priority. Specifies the bridge priority value for the MST. When switches or bridges are
running STP, each is assigned a priority. After exchanging BPDUs, the switch with the
lowest priority value becomes the root bridge. The bridge priority is a multiple of 4096.
If you specify a priority that is not a multiple of 4096, the priority is automatically set to
the next lowest priority that is a multiple of 4096. For example, if the priority is
attempted to be set to any value between 0 and 4095, it will be set to 0. The default
priority is 32768.The valid range is 0–61440.
Fast Link Indicates whether the port is enabled as an edge port.
Status The Forwarding State of this port.
Field Description
Vista de pagina 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 274 275

Comentarios a estos manuales

Sin comentarios