Netgear GS724TS-100NAS Manual de usuario descargar pdf (Pagina 175)

Chapter 5: Managing Device Security | 175

GS716Tv2 and GS724Tv3 Software Administration Manual

• Security MAC Address on page 181

• Protected Ports Membership on page 181

MAC Filter Configuration

Use the MAC Filter Configuration page to create MAC filters that limit the traffic allowed into

and out of specified ports on the system.

To display the MAC Filter Configuration page, click Security  Traffic Control, and then click

the MAC Filter  MAC Filter Configuration link.

To configure MAC filter settings:

1. To configure a new MAC filter:

a. Select Create Filter from the MAC Filter menu. If no filters have been configured, this

is the only option available.

b. From the VLAN ID menu, select the VLAN to use with the MAC address to fully

identify packets you want filtered. You can change this field only when the Create

Filter option is selected from the MAC Filter menu.

c. In the MAC Address field, specify the MAC address of the filter in the format

00:01:1A:B2:53:4D. You can change this field when you have selected the Create

Filter option.

You cannot define filters for the following MAC addresses:

• 00:00:00:00:00:00

• 01:80:C2:00:00:00 to 01:80:C2:00:00:0F

• 01:80:C2:00:00:20 to 01:80:C2:00:00:21

• FF:FF:FF:FF:FF:FF

d. Click the orange bar under the Source Port Members heading to display the

available ports. Select the port(s) to include in the inbound filter. If a packet with the

MAC address and VLAN ID you specify is received on a port that is not in the list, it

will be dropped.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 274 275

Sin comentarios

Netgear GS724TS-100NAS Manual de usuario Pagina 175