Netgear WG102 Manual de usuario descargar pdf (Pagina 88)

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102

B-4 Wireless Networking Basics

202-10064-02, June 2005

The access point authenticates the station.

3. The station associates with the access point and joins the network.

This process is illustrated below.

Figure B-1: Open system authentication

Shared Key Authentication

The following steps occur when two devices use Shared Key Authentication:

1. The station sends an authentication request to the access point.

2. The access point sends challenge text to the station.

3. The station uses its configured 64-bit or 128-bit default key to encrypt the challenge text, and

sends the encrypted text to the access point.

4. The access point decrypts the encrypted text using its configured WEP Key that corresponds

to the station’s default key. The access point compares the decrypted text with the original

challenge text. If the decrypted text matches the original challenge text, then the access point

and the station share the same WEP Key and the access point authenticates the station.

5. The station connects to the network.

If the decrypted text does not match the original challenge text (the access point and station do not

share the same WEP Key), then the access point will refuse to authenticate the station and the

station will be unable to communicate with either the 802.11 network or Ethernet network.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 117 118

Sin comentarios

Netgear WG102 Manual de usuario Pagina 88