Netgear WG102 Manual de usuario descargar pdf (Pagina 45)

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102

Basic Installation and Configuration 3-23

202-10064-02, June 2005

Click Radius Server Settings in the Security menu.

Figure 3-12: Radius Server Settings menu

Enter the Radius settings.

• Authentication/Access Control Radius Server Configuration: This configuration is

required for authentication using Radius. IP Address, Port No. and Shared Secret is

required for communication with Radius Server. A Secondary Radius Server can be

configured which is used on failure on Primary Radius Server

• IP Address: The IP address of the Radius Server. The default is 0.0.0.0.

• Port Number: Port number of the Radius Server. The default is 1812.

• Shared Secret: This is shared between the Wireless Access Point and the Radius Server

while authenticating the supplicant.

• Re-authentication Time: The time interval in seconds after which the supplicant will be

authenticated again with the Radius Server. The default is 3600 seconds.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 117 118

Sin comentarios

Netgear WG102 Manual de usuario Pagina 45