Netgear WG102 Manual de usuario Pagina 53

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 118
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 52
Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
Basic Installation and Configuration 3-31
202-10064-02, June 2005
Shared Secret: This is shared between the Wireless Access Point and the Radius Server
while authenticating the supplicant.
Re-authentication Time: The time interval in seconds after which the supplicant will be
authenticated again with the Radius Server. The default is 3600 seconds.
Global-key Re-Key Time: Check on this option to enable Re-keying of Global Key. The
Global Key Re-Key can be done based on time interval in seconds or number of packets
exchanged using the global key. The default is 3600 seconds.
Update if any station disassociates: Check on this option to refresh global key when any
stations disassociated with wireless Access Point.
Accounting Radius Server Configuration: This configuration is required for accounting
using Radius Server. IP Address, Port No. and Shared Secret is required for
communication with Radius Server. A Secondary Radius Server can be configured which
is used on failure on Primary Radius Server.
IP Address: The IP address of the Radius Server. The default is 0.0.0.0.
Port Number: Port number of the Radius Server. The default is 1813.
Shared Secret: This is shared between the Wireless Access Point and the Radius Server
while authenticating the supplicant.
4. Click Apply to save your settings.
5. Click WEP/WPA Settings in the Security menu.
Figure 3-19: WEP/WPA Settings menu
Vista de pagina 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 117 118

Comentarios a estos manuales

Sin comentarios