Netgear WNAP210 Manual de usuario descargar pdf (Pagina 28)

Installation and Configuration

ProSafe Wireless-N Access Point WNAP210

3. In the Network Authentication field, select one of the following:

• WPA2-PSK

• WPA-PSK

• WPA2-PSK & WPA-PSK

The Data Encryption field automatically updates based on your selection:

• WPA2-PSK is set to AES.

• WPA-PSK is set to TKIP.

• WPA2-PSK & WPA-PSK is set to TKIP+AES.

4. Enter the preshared key passphrase (network key).

5. Leave the Wireless Client Security Separation radio button set to No (it is selected by

default). If this feature is enabled, associated wireless clients will not be able to communicate

with each other. This feature is intended for hotspots and other public access situations.

6. Click Apply to save your settings.

WEP Security

WEP is a legacy security option. NETGEAR recommends that you use a newer security

option such as WPA2 or WPA to protect your network.

 To configure WEP data encryption:

1. Select Configuration > Security > Profile Settings. The profile settings you selected

display.

2. Select the radio button of the security profile you want to modify, and click Edit.

3. From the Network Authentication drop-down list, select either Open System or Shared Key.

4. From the Data Encryption drop-down list, select the encryption strength (64 bits, 128 bits, or

152 bits).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 81 82

Sin comentarios

Netgear WNAP210 Manual de usuario Pagina 28