Netgear XSM7224S Manual de usuario Pagina 55

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 579
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 54
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-14
v1.0, November 2010
spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the
configuration that this switch is currently using. The Configuration Identifier Revision Level is a
number in the range of 0 to 65535.
no spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the
configuration that this switch is currently using to the default value.
spanning-tree edgeport
This command specifies that this port is an Edge Port within the common and internal spanning
tree. This allows this port to transition to Forwarding State without delay.
no spanning-tree edgeport
This command specifies that this port is not an Edge Port within the common and internal
spanning tree.
Default 0
Format spanning-tree configuration revision
<0-65535>
Mode Global Config
Format no spanning-tree configuration revision
Mode Global Config
Default enabled
Format spanning-tree edgeport
Mode Interface Config
Format no spanning-tree edgeport
Mode Interface Config
Vista de pagina 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 578 579

Comentarios a estos manuales

Sin comentarios