Netgear XSM7224S Manual de usuario Pagina 198

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 579
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 197
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-157
v1.0, November 2010
Port Security Commands
This section describes the command you use to configure Port Security on the switch. Port
security, which is also known as port MAC locking, allows you to secure the network by locking
allowable MAC addresses on a port. Packets with a matching source MAC address are forwarded
normally, and all other packets are discarded.
port-security
This command enables port locking at the system level (Global Config) or port level (Interface
Config)
.
Format no set mld mcrtexpiretime
Mode Global Config
Interface Config
Default disabled
Format set mld querier <address ipv6_address>
Mode Global Config
Format no set mld querier address
Mode Global Config
Note: To enable the SNMP trap specific to port security, see “snmp-server enable traps
violation” on page 7-51.
Default disabled
Format port-security
Mode Global Config
Interface Config
Vista de pagina 197
1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 578 579

Comentarios a estos manuales

Sin comentarios