Netgear XSM7224S Manual de usuario Pagina 259

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 579
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 258
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Routing Commands 4-13
v1.0, November 2010
no ip mtu
This command resets the ip mtu to the default value.
encapsulation
This command configures the link layer encapsulation type for the packet. The encapsulation type
can be ethernet or snap.
clear ip route all
This command removes all the route entries learned over the network.
show ip brief
This command displays all the summary information of the IP, including the ICMP rate limit
configuration and the global ICMP Redirect configuration.
Format no ip mtu <mtu>
Mode Interface Config
Default ethernet
Format encapsulation {ethernet | snap}
Mode Interface Config
Note: Routed frames are always ethernet encapsulated when a frame is routed to a
VLAN.
Format clear ip route all
Mode Privileged EXEC
Protocol Tells which protocol added the specified route. The possibilities are: local, static, OSPF, or
RIP.
Total Number
of Routes
The total number of routes.
Vista de pagina 258
1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 578 579

Comentarios a estos manuales

Sin comentarios