Netgear XSM7224S Manual de usuario Pagina 467

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 579
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 466
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-51
v1.0, November 2010
snmp-server enable traps violation
This command enables the sending of new violation traps designating when a packet with a
disallowed MAC address is received on a locked port.
no snmp-server enable traps violation
This command disables the sending of new violation traps.
snmp-server enable traps
This command enables the Authentication Flag.
no snmp-server enable traps
This command disables the Authentication Flag.
Note: For other port security commands, see “Protected Ports Commands” on page 3-53.
Default disabled
Format snmp-server enable traps violation
Mode Interface Config
Format no snmp-server enable traps violation
Mode Interface Config
Default enabled
Format snmp-server enable traps
Mode Global Config
Format no snmp-server enable traps
Mode Global Config
Vista de pagina 466
1 2 ... 462 463 464 465 466 467 468 469 470 471 472 ... 578 579

Comentarios a estos manuales

Sin comentarios