Netgear WNAP210 Manual de usuario Pagina 65

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 126
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 64
3-1
v1.0 March 2009
Chapter 3
Management
This chapter describes how to use the management and monitoring features of your ProSafe
Wireless-N Access Point. To access these features, connect to the WNAP210 access point as
described in “Logging In Using the Default IP Address” on page 2-11. Then select the
Maintenance or Monitoring in the
main menu of the browser interface.
Remote Management
Both the SNMP and Remote Console are enabled by default, which allows for remote
management of the WNAP210 from a client running SNMP management software, as well as
from a secure Telnet console.
To set up an SNMP management interface:
1. Select Maintenance > Remote
Management > SNMP. The SNMP screen displays, as shown
in Figure 3-1.
Figure 3-1
Vista de pagina 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 125 126

Comentarios a estos manuales

Sin comentarios