Netgear WC7520 Manual de usuario Pagina 68

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 213
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 67
Configuring Network Settings
68
ProSafe 20-AP Wireless Controller WC7520
Figure 30.
The DHCP Server List shows the DHCP servers that are already configured on the
wireless controller.
2. Click Add.
The Add DHCP Server pop-up window displays:
Figure 31.
3. Configure the settings as explained in the following table:
Table 11. DHCP settings
Setting Description
Enabled Select this check box to enable the DHCP se
rver. When the check box is cleared,
the DHCP server is disabled.
Use VLAN Interface Select this check box to allow the DHCP server to function with multiple VLANs.
VLAN Enter the DHCP server VLAN ID. The range is between 1 and 4094. The DHCP
server will service this VLAN.
IP Network Enter the IP address for the wireless controller in the VLAN that you have
specifie
d in the VLAN field. If you have not selected the Use VLAN Interface
check box, the IP address of the wireless controller’s management VLAN is
used.
Vista de pagina 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 212 213

Comentarios a estos manuales

Sin comentarios