Netgear WNDAP330 Guía de usuario Pagina 82

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 142
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 81
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
3-12 Management
v1.0, May 2008
2. Enable SysLog – Enable this option if you have a SysLog server on your LAN. If enabled,
you must enter the IP address of your SysLog server and the port number your SysLog server
is configured to use. The default is Disabled.
3. SysLog Server IP Address –The access point will send all the SysLog to the specified IP
address if SysLog option is enabled. Default is 0.0.0.0.
4. Port Number – The port number configured in the SysLog server on your LAN. Default is
514.
5. Click Apply to save your Syslog settings.
Using Activity Log Information
The Activity Log screen displays the Access Point system activity.
Figure 3-9
Vista de pagina 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 141 142

Comentarios a estos manuales

Sin comentarios