Netgear WNDAP330 Guía de usuario Pagina 74

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 142
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 73
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
3-4 Management
v1.0, May 2008
Baud rate: 9600 bps
Data bits: 8
Parity: none
•Stop bit: 1
Flow control: none
These settings appear below the connector on the back panel.
3. Press Enter. The screen shown below in Figure 3-3 should appear.
4. Enter the login name and password (admin and password are the defaults).
After successful login, the <Access Point Name> prompt should appear. In this example, the
prompt is netgear74F35E.
5. Enter help to display the CLI command help.
CLI Commands
The CLI commands are listed in Appendix C, “Command Line Reference.”
Figure 3-3
Vista de pagina 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 141 142

Comentarios a estos manuales

Sin comentarios