Netgear WNHD3004 Guía de usuario descargar pdf (Pagina 38)

3DHD Home Theater Adapter WNHD3004 User Manual

5-2 Customizing Your Wireless Network

v1.0, November 2010

Configuring the Access Point Parameters

By default, the LAN Connection Type on the Network Settings screen is set to Dynamic IP

(DHCP.

If you select Static IP as the LAN Connection Type, these additional fields appear on the screen:

• Access Point IP Address. The LAN IP address of the WNHD3004.

• Subnet Mask. The LAN subnet mask of the router. Combined with the IP address, the IP

subnet mask allows a device to know which other addresses are local to it, and which must be

reached through a gateway or router.

Figure 5-1

Note: If you change the LAN IP address of the unit while connected through the browser,

you will be disconnected. You must then open a new connection to the new IP

address and log in again, and your computer must be in the same range of

addresses as the unit.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 63 64

Sin comentarios

Netgear WNHD3004 Guía de usuario Pagina 38