Netgear WN2500RP Guía de usuario descargar pdf (Pagina 20)

Extender Network Settings

Universal Dual Band WiFi Range Extender WN2500RP

Status Screen

When you connect to http://www.mywifiext.net, after the automatic firmware check, the Status

screen displays. You can also select Status from the menu to display this screen:

This screen shows the current settings and the status of your extender.

You can click Show Statistics to see device performance statistics such as the number of

packets sent and number of packets received for each port. See Show Statistics on page 21.

The following fields are displayed in the Status screen:

• Hardware V

ersion. The hardware version of the extender.

• Firmware V

ersion. The current firmware version of the extender. If you upgrade the

firmware, this field changes.

• GUI Language V

ersion. The language version running on the extender. If you upgrade

the firmware, this field changes.

Connection Status to Existing Network

• Name (SSID). Your extender is set up to connect to this SSID, also called the wireless

name.

• Connection Status. The

status of your wireless connection (connected or disconnected).

• Link Rate.

The actual transmission (Tx) and receive (Rx) link rate in the current wireless

connection.

Extender PC Info

• MAC Address. The physical address of the extender, as seen from the local area

network (LAN).

• IP Address.

The IP address of the extender. The default is 192.168.1.250.

• DHCP Server. Identifies the network DHCP server on the wireless network.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Sin comentarios

Netgear WN2500RP Guía de usuario Pagina 20