Netgear WN2500RP Guía de usuario descargar pdf (Pagina 16)

Extender Network Settings

Universal Dual Band WiFi Range Extender WN2500RP

Extender Wireless Settings

You can use the Wireless Settings screen to change the network name (SSID) for the

extender’s network and to set up wireless security. If you do not change these settings, the

network name is NETGEAR_EXT, and the network is open (no wireless security is set up).

Note: If you use a wireless computer to change the extender’s wireless

settings, you will be disconnected when you click Apply. To

reconnect, you have to select the new network name that you

created, and enter its passphrase or wireless security key.

 To change the wireless settings for the extender’s network:

1. Select Setup > W

ireless Settings to display the following screen:

2. In the Name (SSID) field, you can type in a new name to customize your extender network.

This will make it easier to identify your extender if more than one is operating in your

neighborhood.

3. In the Security Options section of the screen, select the type of wireless security that you

want to use on your network.

• None.

This is an open wireless network. Any wireless computer or device is allowed

to join this network.

• WEP. WEP is an older standard, and is less secure than WP

A or WPA2. WEP uses

encryption keys and data encryption for data security. You can select 64-bit or 128-bit

encryption.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Sin comentarios

Netgear WN2500RP Guía de usuario Pagina 16