Netgear WN1000RP Guía de usuario descargar pdf (Pagina 7)

Getting Started

WiFi Booster for Mobile WN1000RP

The bottom of the booster has the following feature:

• F

actory Reset button. To use this button, stick a paper clip into the reset hole and hold it

until the Status LED blinks. Then release the button.

Install the Booster

 To install the booster:

1 Either connect the AC plug

, or attach the stand and the power adapter cord.

2 Find a place to inst

all the booster that is about halfway between the router and the computer

or wireless device that is outside of the range of the router.

DO DON’T

If you have to use a different location, see Position the Booster on page 8.

3 Power up the boo

ster.

• I

f you connected the AC plug to the booster, plug it directly into an electrical outlet.

• I

f you attached the stand and power adapter, plug the power adapter into an electrical

outlet.

4 W

ait until the Status LED turns green.

5 Use a

computer or wireless device to connect to the booster. During installation, it might be

easier to use a computer or device that is in the same room as the booster.



For a wireless connection, use a WiFi network manager to find and connect to

TGEAR_EXT (the SSID) wireless network.

Tip: You can use any WiFi network manager utility on a computer or tablet to

find and connect to the booster wireless network.

After the connection with the computer is established, the PC to Booster LED

turns

green.

1 2 3 4 5 6 7 8 9 10 11 12 ... 34 35

Sin comentarios

Netgear WN1000RP Guía de usuario Pagina 7