Netgear WNA1000 Guía de usuario descargar pdf (Pagina 35)

NETGEAR Wireless-N 150 USB Adapter WNA1000 User Manual

2-11

v1.0, August 2009

2. Enter the network settings.

a. Select Computer-to-Computer (Ad Hoc) for the network type.

b. Select or enter the network name (SSID) for the Ad Hoc network.

c. In the Profile field, type the name of the profile.

d. Click Apply.

3. Save your settings in a profile.

a. Click Save Profile, and all the configuration settings are saved in this profile.

b. Click Apply, then click Close to exit the Smart Wizard, or click Cancel to return to the

previous settings.

4. Configure the computer network settings.

a. Configure each computer with either a static IP address or with the IPX protocol.

b. Restart the computers.

5. Verify wireless connectivity between your peer devices with the ping program:

a. On the Windows taskbar, select Start > Run.

b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type:

ping -t 192.168.0.1

and then click OK.

Figure 2-9

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 57 58

Sin comentarios

Netgear WNA1000 Guía de usuario Pagina 35