Netgear WNA1000 Guía de usuario descargar pdf (Pagina 23)

NETGEAR Wireless-N 150 USB Adapter WNA1000 User Manual

1-11

v1.0, August 2009

Wireless-N USB Adapter LED

The LED on the wireless-N USB adapter indicates the condition of the wireless link, as described

in the following table.

Removing the WNA1000 Software

You can remove the wireless adapter software in these two ways:

• Select the Windows Start menu > All Programs > NETGEAR WNA1000 Adapter program

group > Uninstall NETGEAR WNA1000 Software, and then follow the screen prompts.

• Select Windows Start menu >Control Panel > Add or Remove Program, and then select the

NETGEAR WNA1000 Adapter option, and follow the screen prompts.

Upgrading the WNA1000 Software

Upgrades might be available at the NETGEAR website. To install an upgrade, follow these steps.

1. Write down the settings for any profiles that you want to save. They will not be retained.

2. Download the upgrade from the NETGEAR website Support page.

3. Remove the WNA1000 software from your computer.

4. Remove the WNA1000 adapter from your computer, and if prompted restart your computer.

5. Run the installer that you downloaded (the file ends in .exe).

6. Follow the installer instructions, and if prompted, restart your computer.

Wireless-N USB Adapter LED Meaning

Off • The wireless-N USB adapter is not plugged in to the USB

port.

• The wireless-N USB adapter is in power save mode (default

from power up or reset).

Blinking • The wireless-N USB adapter is scanning for a network.

• The wireless-N USB adapter is sending or receiving data.

Solid The wireless-N USB adapter is connected to a wireless

network, but it is not sending or receiving data.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Sin comentarios

Netgear WNA1000 Guía de usuario Pagina 23