Netgear WMS5316 Manual de usuario descargar pdf (Pagina 43)

Chapter 6: Configuring Access Point Groups | 43

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

To change the settings of an access point, select it and click the Edit button. You can use the

Edit screen for each access point to change its IP settings, VLAN settings, and password.

Table 3. Status Field Definitions

Status Implies How to Correct

Connected Normal operation. The wireless

management system is able to contact

the access point and manage it.

N/A

Authentication

Failure

The password configured during

synchronization from the wireless

management system is not the same

as the password of the access point.

Select the access point and click Edit. In the Edit

screen, configure the correct password of the

access point and click Apply. The wireless

management system tries again to synchronize

with the access point

Not Connected The wireless management system

cannot connect to the access point with

the configured IP address.

The wireless management system tries to log in to

managed access points every 1 minute. If the error

is temporary, then the status automatically

changes to connected. If the error is prolonged,

verify the access point IP address and network

connection.

Editing Access Point Information

• IP: The IP address of the managed access point.

• Model: The access point model. The field cannot be modified; it is set when the access

point is added to the list.

• Name: The user name for logging in to the access point. This field is not modifiable.

• Password: The password for the access point. If you use the wireless management

system to change a password for an access point, if it is offline or down, its password

does not change. When the access point is unauthenticated, the new password is used to

authenticate to the access point, and if successful, the new password is saved.

• Group Name: You can assign a group name from which the settings will applied to

configure the access point.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 65 66

Sin comentarios

Netgear WMS5316 Manual de usuario Pagina 43