Netgear WMS105-10000S Manual de usuario descargar pdf (Pagina 15)

Chapter 3: Wireless Configuration | 15

ProSafe 5 AP Wireless Management Software WMS105

Advanced Wireless Settings

This page is for advanced users who wish to control the WLAN settings of the access points

manually. On the Configuration tab, select Wireless > Advanced.

To manually specify the WLAN parameters for access points:

1. Disable the Central RF Management feature from the Basic > RF Management page.

This prevents the Wireless Management Software from automatically using RF

management and adjusting power and channel settings for the access point group.

2. Specify the settings in the Advanced Wireless Settings screen (see Table 1).

3. Click Apply so that your changes take effect.

Table 1. Advanced Wireless Settings

Field or Setting Description

Turn Radio On Disable this option to disable wireless access for the selected mode.

To disable all wireless access through this access point, you must

turn off the 802.11b/g/n, as well as the 802.11a/n radios.

Wireless Mode Specify the wireless mode for the access points. Access points use

the mode enabled for the group, unless the access point does not

support the group setting. In that case, the access point uses the

mode providing highest performance.

• The default setting is 802.11ng mode.

• If you specify 802.11b or 802.11/jointfilesconvert/31947/bg mode, both 802.11n- and

802.11g-compliant devices can be used with this access point.

However, 802.11b devices will not be able to connect.

• If you select this option and other settings on this screen are

disabled, then you must select the Turn Radio On radio button to

enable available options on this screen.

Data Rate Select the available transmit data rates of the wireless network.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Sin comentarios

Netgear WMS105-10000S Manual de usuario Pagina 15