Netgear Switch M4100 Manual de usuario Pagina 492

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 559
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 491
492 | Chapter 29. DHCP L2 Relay and L3 Relay
ProSafe M4100 and M7100 Managed Switches
A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Scroll down and select the VLAN ID 200 check box.
d. Enter the following information:
In the Admin Mode field, select Enable.
In the Circuit ID Mode field, select Enable.
In the Remote ID String field, enter rmt_id.
e. Click Apply to save the settings.
5. Enable DHCP L2 Relay on interfaces 1/0/4,1/0/5, and 1/0/6.
a. Select System > Services > DHCP L2 Relay > DHCP L2 Relay Interface
Configuration.
A screen similar to the following displays.
b. Scroll down and select the 1/0/4, 1/0/5, and 1/0/6 check boxes.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
6. Enable DHCP L2 relay trust on interface 1/0/6.
Vista de pagina 491
1 2 ... 487 488 489 490 491 492 493 494 495 496 497 ... 558 559

Comentarios a estos manuales

Sin comentarios