Netgear Switch M4100 Manual de usuario descargar pdf (Pagina 237)

100

101

Chapter 12. DiffServ | 237

ProSafe M4100 and M7100 Managed Switches

Color Conform Policy

This example shows how to create a policy to police the traffic to a committed rate. The

packets with IP precedence value of 7 are colored green to ensure that these packets are the

last to be dropped when there is congestion. The example is shown as CLI commands and

as a Web interface procedure.

CLI: Configure a Color Conform Policy

1. Create a VLAN 5 and configure ports 1/0/13 and 1/0/25 as its members.

(Netgear Switch) #vlan database

(Netgear Switch) (Vlan)#vlan 5

(Netgear Switch) (Vlan)#exit

(Netgear Switch) #config

(Netgear Switch) (Config)#interface 1/0/13

(Netgear Switch) (Interface 1/0/13)#vlan participation include 5

(Netgear Switch) (Interface 1/0/13)#vlan tagging 5

(Netgear Switch) (Interface 1/0/13)#exit

(Netgear Switch) (Config)#interface 1/0/25

(Netgear Switch) (Interface 1/0/25)#vlan participation include 5

(Netgear Switch) (Interface 1/0/25)#vlan tagging 5

(Netgear Switch) (Interface 1/0/25)#exit

2. Create classes class_vlan and class_color.

Note: DiffServ service is enabled by default.

(Netgear Switch) (Config)#class-map match-all class_vlan

(Netgear Switch) (Config-classmap)#match vlan 5

(Netgear Switch) (Config-classmap)#exit

(Netgear Switch) (Config)#class-map match-all class_color

(Netgear Switch) (Config-classmap)#match ip precedence 7

(Netgear Switch) (Config-classmap)#exit

3. Create a policy to police the traffic to a rate of 1000 kbps with an allowed burst size of

64 KB. Furthermore, the packets with IP precedence value of 7 will be colored green. That

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 558 559

Comentarios a estos manuales

Sin comentarios

Netgear Switch M4100 Manual de usuario Pagina 237

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Netgear Switch M4100