Netgear WNDAP350 Guía de usuario descargar pdf (Pagina 54)

ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual

2-32 Basic Installation and Configuration

v2.0, April 2013

To configure a Security Profile:

1. From your Web browser, log in to the WNDAP350 using the default LAN address of

http://192.168.0.237, user name admin and password password, or use the LAN address and

password that you set up.

2. Under the Configuration tab, select

Security from the main menu, and then select either

Security Profile Settings for 802.11b//jointfilesconvert/42729/bg/ng or 802.11a/na. The screen for the Profile Settings

you selected displays as shown in Figure 2-15above.

3. Select the check box of the profile you want to modify and click Edit. The Security Profile

Configuration screen for the selected profile displays (see Figure 2-16).

4. Give your profile a meaningful name so that you can remember it later.

5. The Wireless Network Name (SSID) is set by default to identify it as NETGEAR_11g.

6. Enable or disable the Broadcast Wireless Network Name (SSID). It is enabled by default. (If it

is broadcast, it can be easily detected by other clients.)

7. From the Network Authentication pull-down menu, select the Network Authentication Type

you want to use for this profile:

• To configure WEP encryption for Open Systems or Shared Key, see “Configuring WEP”

on page 2-33.

Figure 2-16 Edit a security profile

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 137 138

Sin comentarios

Netgear WNDAP350 Guía de usuario Pagina 54