Netgear WG602v3 Manual de usuario descargar pdf (Pagina 97)

Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3

Preparing Your PCs for Network Access D-3

202-10060-02, February 2005

If you need to add TCP/IP:

a. Click the Add button.

b. Select Protocol, and then click Add.

c. Select Microsoft.

d. Select TCP/IP, and then click OK.

If you need to add the Client for Microsoft Networks:

a. Click the Add button.

b. Select Client, and then click Add.

c. Select Microsoft.

d. Select Client for Microsoft Networks, and then click OK.

If you need to add File and Print Sharing for Microsoft Networks:

a. Click the Add button.

b. Select Client, and then click Add.

c. Select Microsoft.

d. Select File and Print Sharing for Microsoft Networks, and then click OK.

3. Restart your PC for the changes to take effect.

Enabling DHCP to Automatically Configure TCP/IP Settings

After the TCP/IP protocol components are installed, each PC must be assigned specific

information about itself and resources that are available on its network. The simplest way to

configure this information is to allow the PC to obtain the information from a DHCP server in the

network.

You will find there are many similarities in the procedures for different Windows systems when

using DHCP to configure TCP/IP.

The following steps will walk you through the configuration process for each of these versions of

Windows.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 121 122

Sin comentarios

Netgear WG602v3 Manual de usuario Pagina 97