
ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
Introduction 1-7
v2.0, May 2006
The following table explains the LED indicators:
Table 1-1. Front Panel LED Indicators
Item LED DESCRIPTION
1 PWR Power Indicator
Off No power.
On Power is on.
2 TEST Self Test Indicator
Blink Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going off.
3 100 Ethernet LAN Speed Indicator
Off Indicates 10 Mbps Ethernet link detected
On (Green) 100 Mbps Fast Ethernet link detected.
4 LINK/ACT LAN Ethernet LAN Link Activity Indicator
Off Indicates no Ethernet link detected.
On (Green) 100 Mbps Fast Ethernet link detected, no activity.
Blink
(Green)
Indicates data traffic on the 100Mbps Ethernet LAN.
On (Amber) 10 Mbps Ethernet link detected, no activity.
Blink
(Amber)
Indicates data traffic on the 10Mbps Ethernet LAN.
5 802.11a WLAN Wireless LAN Link Activity Indicator (5 GHz)
Off Indicates no wireless link activity.
Blink
(Green)
Wireless link activity.
6 802.11g WLAN Wireless LAN Link Activity Indicator (2.4 GHz)
Off Indicates no wireless link activity.
Blink
(Green)
Wireless link activity.
Comentarios a estos manuales