Netgear WAC120 Guía de instalación descargar pdf (Pagina 7)

a. Connect the power adapter to the access point and plug

the power adapter into an outlet.

b. Wait for the Power LED

on the front panel to light

amber and turn green.

If no LEDs are lit, press the Power On/O button on the

rear panel of the access point.

4. Connect a computer.

1 2 3 4

LEDs

The LEDs on the wireless access point light to indicate wireless

access point activity:

LED Description

Power

LED

•O. Power is o.

•Green. Power in on.

•Amber. A self-test is running. During startup the LED is amber, then

blinking green before turning steady green aer 45 seconds. If the LED is

amber or continues blinking green aer one minute, a system fault exists.

Activity

LED

•O. No ethernet trac is detected.

•Green or blinking green. Ethernet trac is detected.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Netgear WAC120 Guía de instalación Pagina 7