Netgear RangeMax WN802T Manual de usuario descargar pdf (Pagina 25)

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual

Installation and Configuration 2-5

v1.0, September 2008

To select the local time zone:

1. Select Configuration > System > Basic > Time. The Time Settings screen displays.

2. Configure the following information:

– Time Zone. From the pull-down menu, select the local time zone for your wireless access

point from a list of all available time zones. The default is Pacific Time (US-Canada).

– Daylight Saving. This option is always disabled. The default is no adjustment.

– Current Time. The AP gets the current time from its system clock, or an NTP server if

this is enabled.

– NTP Client. Enable NTP Client to synchronize the time of the access point with an NTP

Server. The default is Enabled.

– Use Custom NTP Server. Check the option if you have a custom NTP server. The default

is Disabled.

– Hostname/IP Address. Enter the host name or the IP address of the custom NTP server.

The default is time-b.netgear.com

Figure 2-3 Local time zone settings

Note: You must have an Internet connection to get the current time from an NTP

server.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 95 96

Sin comentarios

Netgear RangeMax WN802T Manual de usuario Pagina 25