Netgear PS111W Manual de usuario

Installation GuidePS111W Wireless Ready Print Server

Wired LAN (Ad-hoc Mode)Requires that a NETGEAR MA401 802.11b Wireless PC card be installed in the PS111W Print Server.Note that configuration must be

Wired and Ad-hoc Wireless LANRequires that a NETGEAR MA401 802.11b Wireless PC card be installed in the PS111W Print Server.The Wireless LAN MUST use

Invalid Configuration!You CANNOT use both the wired and wireless connections on the PS111W simultaneously if thewireless LAN is in infrastructure mode

Physical InstallationIf you have a NETGEAR MA401 802.11b Wireless PCMCIA Card, insert if before starting.(There is no PCMCIA Wireless card included in

If you find any problems:• Check all connections• If required, verify the integrity of the print server by resetting it. Turn power to the printserver

5. The "Choose Destination Location" screen lets you choose the location where you want to install the NETGEAR Print Server software. Norma

6. If a wireless card is installed, the next screen provides setup for the wireless printing environment. • Make SSID the same as used in the existi

setup program is not started, go to "Start – Run …" and type " d:\setup ", where " d " isthe drive letter of the CD ROM

TroubleshootingSolutionMake sure that:• There is a proper link established between the print server and the hub or workstation. If the LAN or WLAN

Replacement Power AdapterPWR-012-101 Power adapter (12 V DC, 800 mA), linear, North AmericaPWR-012-281 Power adapter (12 V DC, 800 mA) linear, Austral

NETGEAR, INC.4500 Great America ParkwaySanta Clara, CA 95054USAPhone: 1-888-NETGEARE-mail: [email protected] SupportYOU MUST

Warranty InformationPrint server and Power adapter, 2 yearsCertificate of the Manufacturer/ImporterIt is hereby certified that the, Model PS111W Print

installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off

Start HereInstructions in this guide are for users with the following:• Microsoft®Windows®95,Windows®98,Windows®ME, Windows®2000, Windows XP®,or Wind

Package ContentsVerify that your package contains the following:• PS111W Wireless Ready Print Server• 12V, 800mA Power Adapter• PS100 Series Print Ser

LEDsThe following table describes the activity of the LEDs on the PS111WWireless Ready Print Server Label Color Activity DescriptionPWR Green On Power

Wireless PC Card SlotTo take advantage of the optional wireless capability, you must remove the rubber slot coverbefore you can put in a NETGEAR MA401

Rear PanelLabel Function DescriptionPRINTER Parallel Accepts an IEEE1284 printer cable that connects Printer Port to the printer.NETWORK 10/100 Auto-

Typical applicationsYou can use only one of the following applications.Wired LAN onlyUse this configuration if no wireless card is installed in the PS

Wired LAN (Infrastructure Mode)Requires that a NETGEAR MA401 802.11b Wireless PC card be installed in the PS111W Print Server.In Infrastructure mode,