Netgear ME101 Guía de usuario descargar pdf (Pagina 8)

Connecting Multiple Devices

1. Turn off the gaming console(s) and other Ethernet-enabled device(s).

2. Connect the provided Ethernet cable between the ME101 Wireless Bridge and a hub.

3. Connect the powered down game console(s) and the powered down Ethernet-enabled

device(s) to the hub.

4. Connect the power adapter to the wireless bridge and plug the power adapter in to a

power outlet. The Power and Wireless LAN lights should light up.

5. Connect the power adapter to the hub. Plug the hub’s power adapter in to a power outlet.

6. After the Wireless light on the bridge lights up, turn on any game console(s).

7. Turn on any other Ethernet-enabled devices.

If the bridge and the Ethernet-enabled device(s) are successfully connected, the Network

light on the bridge will light up. This light flashes when there is network activity.

Note: If your setup works with the default settings, you don’t need to install the software

from the provided CD to configure the bridge unless you need to change the

Country/Region setting from the default setting (U.S.A.) or you have more than one

ME101 bridge on your network.

Default Ethernet AntennaDC in 5V

1234

10 BASE-T HUB EN104 Link Rx

Normal / Uplink

PWR

COL

Wireless Router

MR814

Cable or

DSL modem

ME101 Wireless

Ethernet Bridge

EN104TP Ethernet Hub

Gaming console or other

Ethernet-enabled device

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 24 25

Sin comentarios

Netgear ME101 Guía de usuario Pagina 8