Netgear ME101 Manual de usuario descargar pdf (Pagina 15)

5. Click OK.

6. Type the old password in the Old Password box.

7. Type a new password in the New Password box.

8. Re-type the new password in the Confirm Password box.

9. Click Apply.

10. If you are through making changes, click Logout.

Changing the Security Settings:

To have the bridge work on your network, its security settings must match those of the wireless

access point or router. You may use the browser-based configuration software to change the

WEP security settings. The default setting is to have WEP disabled. If you filled in the

parameters on page 6, you may want to refer to them for this procedure.

1. Start your browser software.

2. Type http:// followed by the IP

address for the bridge (the default

is 192.168.0.200) as the Web

address and press Return.

You’ll see the Information page.

3. To change the password, click

Security Settings.

4. Type admin as the User ID and

type the current password

(password is the default) as the

Password.

5. Click OK.

6. Select an Encryption Length to

enable WEP security.

7. If the key is determined through software, type the phrase in the Passphrase box and click

Generate.

If you entered a key manually for your wireless router or access point, select a Key and

type the hexadecimal values that are used with the wireless router or access point.

8. Click Apply.

9. If you are through making changes, click Logout.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Sin comentarios

Netgear ME101 Manual de usuario Pagina 15