Netgear 802.11b Manual de usuario descargar pdf (Pagina 95)

Reference Manual for the ME103 802.11b ProSafe Wireless Access Point

Network, Routing, Firewall, and Cabling Basics C-13

August 2003

The ME103 Access Point incorporates Auto Uplink

technology (also called MDI/MDIX). The

Ethernet port will automatically sense whether the Ethernet cable plugged into the port should

have a normal connection (e.g. connecting to a PC) or an uplink connection (e.g. connecting to a

router, switch, or hub). That port will then configure itself to the correct configuration. This feature

also eliminates the need to worry about crossover cables, as Auto Uplink

will accommodate

either type of cable to make the right connection.

Cable Quality

A twisted pair Ethernet network operating at 10 Mbits/second (10BASE-T) will often tolerate low

quality cables, but at 100 Mbits/second (10BASE-Tx) the cable must be rated as Category 5, or

Cat 5 or Cat V, by the Electronic Industry Association (EIA). This rating will be printed on the

cable jacket. A Category 5 cable will meet specified requirements regarding loss and crosstalk. In

addition, there are restrictions on maximum cable length for both 10 and 100 Mbits/second

networks.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 117 118

Sin comentarios

Netgear 802.11b Manual de usuario Pagina 95