Netgear WG302v1 Nota de aplicación descargar pdf (Pagina 2)

In the Remote MAC address field, put the MAC address of the other access points; you’ll be able

to find the MAC address of each access point underneath the device, on its tag – Or alternatively

in the ‘General’ section of the GUI.

CONFIGURATION – Second unit:

Once this access point has its basic configuration set and you’ve confirmed it to be working

properly, go to the ‘Access Point Settings’ section and enable wireless bridging and repeating,

select ‘Wireless Point to Point Bridge’ and enable Wireless Client Association (If you want

stations to be able to connect to this particular access point).

In the ‘Remote MAC Address’ field insert the MAC address of the FIRST unit.

TESTING – Verifying the connection:

To verify this connection, try connecting wirelessly to the main unit and using the ‘ping’ DOS

command to the IP address of the other access points. If the replies are successful, you’ll know

the configuration was successful.

1 2

Sin comentarios

Netgear WG302v1 Nota de aplicación Pagina 2