Netgear MP101 Guía de usuario descargar pdf (Pagina 15)

User’s Manual for the MP101 Digital Music Player

Setting Up the MP101 1-7

Note: Detailed background on wireless networking can be found in Appendix B, Wireless

Networking Basics.

To start the MP101 Digital Music Player on a wireless network:

1. Plug in your player. The display will show start-up messages as it scans for wireless networks.

Up to 30 networks that are detected will be displayed. Also displayed for each network will be

the type of network (Infrastructure or Ad-Hoc), whether security is enabled or disabled, and

the wireless channel.

Note: If the MP101 cannot detect a wireless network, you may have to select Available

Networks to re-scan. If you have disabled broadcast of SSIDs on your network, see Manual

Wireless Configuration on page 3-3.

2. Select the desired network. If the selected wireless network has Wireless Encryption (WEP)

disabled, you do not need to configure WEP encryption and can skip to Step 4. If the selected

wireless network has WEP enabled, the MP101 will automatically detect it and bring up the

WEP Security screen.

3. The WEP Security screen will guide you through WEP configuration. At any point you can

press [

W] to move to the previous screen.

a. The current WEP Setting is shown.

Press

[OK] to accept the setting or press [X] to change the setting. WEP can be disabled,

or set to either 64- or 128-bit encryption strength.

WEP Key.

Select the method for creating WEP data encryption keys.

AvAILABLE NETWORKS

(

3) NETGEAR

(

9) Wireless

WEP Security

Disabled

OK to accept,

to edit

WEP Key

Passphrase

Manual Keys

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Sin comentarios

Netgear MP101 Guía de usuario Pagina 15