Universal Dual Band WiFi Range Extender WN2500RP Installation GuideExtended Wireless RangeExisting Router Range5 GHz Wireless2.4 GHz Wireless2.4 AND 5
103. The web browser setup guide walks you through the following steps:• Selecting the Wi-Fi network you would like to extend.• Entering the
11Extender Performance The Link Rate LED indicates the performance of the 2.4 GHz or 5 GHz wireless connection from the Extender to a router. • T
12To improve Extender performance:1. Move the Extender closer to the router or to a different location with a better line of sight. 2. As you move t
13FastLane™ TechnologyFastlane™ Technology offers maximum Wi-Fi performance. It provides high-speed Wi-Fi with a dedicated band connecting the Extende
14Four-Port Wi-Fi AdapterOnce the Extender is connected to your existing wireless Wi-Fi network, you can use the Ethernet ports on the Extender to con
15When to Use the Extender Wireless NetworkNETGEAR recommends that you connect to the Extender wireless network only when a PC or wireless device is i
16Wireless SSIDs and PasswordsUse the space below to record your new Extender network name (SSID) and Extender security settings, in case you need to
17Frequently Asked QuestionsYou can find more information about your product in the User Manual available at http://support.netgear.com.1. NETGEAR Ge
ComplianceDeclarations of ConformityFor complete DoC please visit the NETGEAR EU Declarations of Conformity website at: http://kb.netgear.com/app/answ
© 2011 NETGEAR, Inc. All rights reserved.No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or t
NETGEAR, Inc.350 East Plumeria DriveSan Jose, CA 95134 USANovember 2012
3Hardware FeaturesThe LEDs on the front show how the Extender is working.Link Rate. Indicates a 2.4 GHz or 5 GHz wireless connection between th
The back panel has the following features:Reset factory settings. To reset the Extender to its original factory settings, insert a paper clip into the
5Getting StartedThe WiFi Range Extender extends the wireless network to include the area outside the range of your existing Wi-Fi network. Follow thes
6Connecting the Extender to an Existing Wi-Fi NetworkTo extend the range of your Wi-Fi network, you need to connect the Extender to your existing Wi-
7Option 1: Connecting with WPS (Wi-Fi Protected Setup)1. Press the WPS button on back panel of the Extender. The WPS LED on the front should blink.2.
8Option 2: Connecting with web browser setup guide1. Once the Extender is powered on and the Power LED is green, use a wireless network manager on
92. Open a web browser window from the same PC, and the browser should take you directly to the onscreen setup guide.Tip: You can always access the
Comentarios a estos manuales