Netgear WN111v2 Guía de usuario descargar pdf (Pagina 30)

NETGEAR RangeMax Wireless-N USB 2.0 Adapter WN111v2 User Manual

2-10

v1.0, May 2008

1. Use the icon to open the Smart Wizard. The Settings tab displays:

2. Enter the network settings.

a. In the Network Type section, make sure that Access Point (Infrastructure) is selected.

b. In the Profile field, type a name for the profile.

c. In the Network Name (SSID) field, select a network or enter the SSID.

3. Click Save Profile.

All the configuration settings are saved in this profile.

4. To use the profile, click Apply.

5. Verify wireless connectivity to your network.

Use a browser to connect to the Internet, or check for file and printer access on your network.

You can check the status bar in the Smart Wizard for the current connection status.

Figure 2-8

Note: You will not get a wireless network connection unless the network SSID

matches exactly the SSID used by the access point.

Note: If you cannot connect, see Chapter 4, “Troubleshooting”. For problems with

accessing network resources, the Windows client and file and print sharing

software might not be installed and configured correctly on your computers.See the

link to “Internet Networking and TCP/IP Addressing:” in Appendix B.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 55 56

Sin comentarios

Netgear WN111v2 Guía de usuario Pagina 30